|
The Electrical boots washing unit is similiar to the Sole washer WET 600. However, it is also equipped with two additional nylon brushes situated on the sides.
Thanks to the electrical boots washing unit, dirty boot soles and rubber boot legs are cleaned and disinfected at the same time.
How it works:
Once the safety switch (1) has been pushed, three round brushes (2+3) begin to rotate. Simultaneously, water and disinfectant spray out of different nozzles (4+5) onto the rotating brushes.
The rotating brushes ensure the quick and easy cleaning of both the soles and the boot legs, just as you would expect from a boot cleaner.
Use:
- Stand on the platform
- Hold onto the safety bar with both hands
- Step onto the grating in the cleaning room with one leg
- Press on the safety switch and release after a short amount of time
- Once the brushes have come to a stop, change legs and repeat the process
Technical data
1. Case: Stainless steel design
2. Water consumption: approx. 6 liters per minute
3. Measurements: 112 cm x 95 cm x 131 cm (Length x Depth x Height)
4. Feeding pump: Adjustable from approx. 0.01 to 0.5 l/min
5. Weight: 138 kg net, 150 kg gross
6. Contact switch: On the handle bar
7. Electrical data: 400 Volts, 16 A, three-phase current
8. Guarantee: 2 years
|
Shoe shine machines
