|
These high quality sole cleaning machines WET 500 are made entirely from stainless steel. They should be used as a forced pathway which all users have to pass. Before entering the actual cleaning area the user will be recognised by an optical sensor located in the hand rail. This sensor automatically starts the counter-rotating wheel brushes and switches the machine off when the user has left the device.
Sole cleaning machine WET 500 is a wet cleaning unit and requires a ½" connection for water input. When the sole cleaning machine starts, a solenoid valve opens and feeds water to the bin and brushes. A separate hose pump can add cleaning fluids or disinfectants while a regulator is responsible for a constant level. The wheel brushes take up water plus optional cleaning media and transport both towards the soles to be cleaned. Effluent water is drained away from the machine’s bin and should be fed into drainage. A drip-off grate behind the brushing area minimizes further water transportation. With a 1" drain cock dirty water can be let off.
Technical data
1. Case: made entirely from stainless steel
2. Measurements inclusive drip-off grate: 70 cm x 50 cm x 18,5 / 128 cm (Length x Depth x Height)
3. Drive: round belt drive and strong motor
4. RPM of the brushes: via frequency inverter continuously variable
5. Dimension of brush area: 40cm x 50cm x 1cm (width x depth x height)
6. Brushes: nylon fiber: 0,2 mm, black, smoothly waved
7. Weight: 107 kg net, 123 kg gross
8. Start/Stop automatism: via optical sensor
9. Electrical datas: 230 Volts (optionally 110 Volts)
10. Motor: 0,18 kW, 50 Hz, Iso-CI, F, IP 55
11. Guarantee: 2 years
12. Specifics:
½" water supply with solenoid valve.
Pressure can be regulated from 0 – 1,6bar.
Hose pump with 0,15 – 4,5l / hour water throughput.
Drain cock with 1" exit.
|
Shoe shine machines
