This
boot washer made of stainless steel 1.4301 can be used for 1 to 3 wash places, depending on the selected option. The corresponding overall lengths are 700 / 1400 / 2100 mm. The boot cleaners are installed at ground level on the final floor. This boot wash station is ideally suited for smaller companies in the meat and food industry.
Boot wash stations for hygiene areas made out of rust-free 1.4301 high-grade steel!
1-3 cleaning places according to your chosen option
Version stainless steel 1.4301 welded and polished
Draining area with odour trap
Detachable sludge trap tray
Hinged grating
Square base frame with height adjusters
1 device connection valve DN 15 with back-flow preventer and pipe diffuser
1-3 pieces of hand brush with hand lever valve with 2 replaceable sets of brushes, each with 1.5 m connecting hose
No power required
Image: LUX Boot washer 1-3 inclus. handle bar with chromed shut-off valve with tube aerator and back-flow preventer.
Each boot washer is equipped with a hinged grating which is attached at an angle to the front. A water drainer is located in the centre of the base plate of the system. This drainer is equipped with a removable sludge trap tray and odour trap. A chrome-plated shut-off valve with tube diffuser and backflow preventer is attached to a holding bar behind each wash place. A water-carrying hand brush is connected to this connection.
The hand brush allows the cleaning of boots, shoes or other objects.
Additional safety during use is ensured by a stainless steel support bar which is attached to the system. The systems can be installed in front of a wall or free-standing. Due to the special water flow in the support bars, systems can also be installed opposite one another.
