The Profilgate active dirt trapper mat was developed especially for cleaning shoe soles in industrial areas. The neutral-coloured black and white bristles of ProfilGate go fit seamlessly into any environment.
Image: Suited to actively cleaning soles in idustrial areas.
The bristles are 2 mm longer than those found in other ProfilGate models, allowing them to reliably clean workboots with a course profil in particular. The slanted bristles are compressed when soles come into contact with the cleaning grate, allowing them to actively rid soles of any dirt.
Unlike simple doormats/entrance mats, this model features special brushes positioned at an angle (patent-protected) that thoroughly clean sole profiles in a purely mechanical fashion (thanks to the brush motion). Pre-stressed brush strips position the bristles to protrude above the grate by up to 15 mm. Once a defined contact pressure (approx. 8 kg/strip) is exerted, the bristles will push against the soles. In combination with the swinging motion caused by people walking over the mat, this enables sole profiles to be cleaned in an active, highly efficient way.
Dirt falls into a 55 mm deep tray, preventing it from being picked up again by the next person (a problem with simple doormats). Removed dirt is collected in trays located underneath the grating. The trays can be easily cleaned by removing the grating.
ProfilGate, above-ground –
no installation work required
ProfilGate, at ground level –
with ditch for the tray
ProfilGate b45 go above-ground version
with special ramps
ProfilGate b45 version for installation
at ground level
More Pictures of active dirt trapper mat ProfilGate
If installed at ground level, ProfilGate can also be driven over by forklifts and other conveyor vehicles. Ramps can be used where installation at ground level is not possible, and do not require a lot of space. ProfilGate b45 ramps can also be driven over by light hand carts (up to 100 kg).
We recommend that soles come into contact with the brush grates at least three times to ensure thorough cleaning and remove 90% of dirt!
Clean Factory Interactive
The Clean Factory shows the optimal applications of ProfilGate in clean factories. The Clean Factory concept demonstrates how most contaminants can be kept outside your facilities and cross-contamination between different work areas can be prevented through use of various ProfilGate models.
Use Clean Factory Interactive yourself to obtain more information – including pictures and references – about every ProfilGate model available. Just click on the blue and grey grates!
Option:
ProfilGate b55 dryzone - drying
Minimises amount of moisture brought into buildings
Dries shoe soles
Removes oils and emulsion from shoe soles
Ultra-absorbent, heavy-duty non-woven material
Increases safety at the workplace
Can be used in combination with all ProfilGate models
This ProfilGate version keeps floors dry. It is often used in areas
where bringing in moisture is undesirable or where preventing accidents
and maintaining workplace safety is a top priority.
The special grating is covered with the unique DryPad – a heavy-duty
non-woven material that is easily and securely fixed to the grating
using two rubber pinch rolls. It absorbs liquids when it comes into
contact with shoes/vehicles, including water, emulsion and oils. This
enables it to reliably clean shoe soles.
ProfilGate dryzone is best suited for use in combination with a
ProfilGate system (brush version). Pedestrians first of all walk across
the ProfilGate b55 go (brush version) cleaning grate to remove course
dirt from their shoe soles. Afterwards, ProfilGate DryPads soak up any
excess liquid. This ensures thorough cleaning and minimises the amount
of moisture brought into the building.
The stainless steel trays positioned underneath the dryzone grating
are the same size as those found in the corresponding ProfilGate models.
As a result, the grates can be combined within the cleaning grates and
replaced depending on the application as desired.
This also means that ProfilGate dryzone can be easily added to
existing systems at a reasonable price. DryPads are cheap to buy and
should be replaced on a regular basis.