Message

Learn more about the sole cleaning machine WET-DRY 500 in this product video:

These high quality sole cleaning machines WET-DRY 500 are made entirely from stainless steel. They should be used as a forced pathway which all users have to pass. Before entering the actual cleaning area the user will be recognised by an optical sensor located in the hand rail. This sensor automatically starts the counter-rotating wheel brushes and switches the machine off when the user has left the device.

Image: Rotation speed of the brushes fully adjustable.

Sole cleaning machines WET-DRY 500  is a wet cleaning unit and requires a ½" connection for water input. When the sole cleaning machine starts, a solenoid valve opens and feeds water to the bin and brushes. A separate hose pump can add cleaning fluids or disinfectants while a regulator is responsible for a constant level. The wheel brushes take up water plus optional cleaning media and transport both towards the soles to be cleaned. Effluent water is drained away from the machine’s bin and should be fed into drainage. A drip-off grate behind the brushing area minimizes further water transportation. With a 1" drain cock dirty water can be let off.

To ensure that the soles are dried efficiently, the grate is covered with our non-woven fabric cut DryPad. DryPad is a super-absorbent, high-performance non-woven fabric, which actively draws the moisture from the soles in a capillary action. In addition to thoroughly drying the soles, the high-performance non-woven fabric also quickly dries itself again. The non-woven fabric can be changed within seconds without the use of tools.

Case: made entirely from stainless steel
Dimensions (Version: inclusive drip-off grate)
700 mm x 1500 mm x 185 / 1280 mm (width x depth x height)
Drive: round belt drive and strong motor
RPM of the brushes: via frequency inverter continuously variable
Dimension of brush area: 40cm x 50cm x 1cm (width x depth x height)
Brushes: nylon fiber: 0,2 mm, black, smoothly waved
Contact switch: via optical sensor
Electrical supply: 230 Volts (optionally 110 Volts)
Motor Power: 0,18 kW, 50 Hz, Iso-CI, F, IP 55
Weight: 107 kg net, 123 kg gross
Warranty: 2 years

1Specifics:
½" water supply with solenoid valve. 
Pressure can be regulated from 0 – 1,6bar.
Hose pump with 0,15 – 4,5l / hour water throughput.
Drain cock with 1" exit.