The
Boot washer multi-grate is a
professional boot washer intended for wall mounting. The use of high-quality, 2 millimetre thick stainless steel sheet makes it
ideal for tough use in fire stations and police stations, butcher's shops or in agriculture. The washing trough of the boot washer
is covered by a large, galvanized grate. For use in hygienic areas, the system can optionally be supplied with a stainless steel grating (see options).
The boot washer is available with washing places for 2, 4 and 6 persons (1, 2 and 3 m long). We recommend a width of 1 meter for 2 persons. If these standard dimensions do not meet your requirements, we will be pleased to offer you special designs with special dimensions on request.
The
Boot washer multi-grate impresses by the following characteristics:
For the use of 2-6 people according to the option you choose
Made from 1.4301 brushed stainless steel
Boot washer with detatchable galvanised steel grating (or as an option with stainless steel grating)
4 height-adjustable feet
Outflow: DN 50
Sludge collecting tub and odour trap at an additional charge (see option)
No power necessary
Hand brushes are not supplied. Please choose between the different models at the bottom of this page in the accessories section
Compatible hand-held brushes come in 2 varieties (see accessories)
1.) Simple version made out of plastic with nylon bristles,
1 m connection hose
2.) Profi-version made out of stainless steel with plastic handle,
hand controlled valve, 1.5m connection hose, R ¾ inch connection
Image: Boot washer multi-grate for 2-6 people.
For cleaning the dirty footwear,
the boots and shoes can be conveniently positioned on the grid of the washing trough. The shoes are
cleaned quickly and thoroughly with hand brushes and externally supplied water. The contaminated wastewater is collected by the large channel and automatically discharged into the drain, which
prevents large-area distribution of moisture and dirt. The drain of the boot washing trough can optionally be equipped with a sludge trap and an odour trap (see options). The boot washer can be equipped with protective walls for additional protection against splash water (see options).
Our Boot washer multi-grate
proves itself daily on countless sports fields, companies of the construction industry, gardening and production companies. Due to the use of high-quality stainless steel, it impresses with its great robustness and very long service life. Thanks to the removable grating, its functional design and the use of high-quality materials,
the cleaning and maintenance effort is reduced to an absolute minimum.
Image: Manual for boot washer multi-grate.
As an option the boot washer can be equipped with two side splashboards and one rear splashboard. This prevents the area around the wash station, as well as sensitive equipment and people in the area, from becoming wet and dirty as a result of spray (see option Splash protection wall).
Image: Boot washer multi-grate with splash protection walls.
Upon request, this boot washer can also be equipped with a sludge collecting tub and odour trap which preserves drainpipes and prevents bad-smelling odours (see option Additional option).
Image: Optional sludge collecting tub with or without odour trap
The water connection must comply with the regulations of the responsible waterworks. The European standard DIN EN 1717 is the guideline here, supplemented by national standards. The drinking water installation must be carried out exclusively by an authorised specialist company. When connecting to the drinking water system, an approved system separator / pipe separator must be considered (not included in the delivery).
