Description
The sole-shaft-cleaner for working shoes reliably removes dirt, mud and other impurities from work shoes.
With the help of this boot cleaner, time-consuming and unpleasant manual cleaning of work shoes can be avoided. The risk of accidents at work is reduced by eliminating inefficient and slippery foot basins, which can anyway only be entered with boots.
The sole-and-shaft-cleaner for working shoes is recommended for the following reasons:
- Easy and safe handling
- Suitable for work shoes thanks to the deep nozzles and the regulator
- Ecological and economical due to the absence of electricity and low water consumption
- Significant time savings compared to classic shoe and boot cleaning
The sole brush and the two side brushes of this boot washer each have 10 nozzles from which a water jet sprays. The water nozzles are not only used for moistening, but also contribute directly to the cleaning process. The water jets from the side brushes can be deactivated via a laterally mounted regulator. This ensures that neither trousers nor socks get wet when shoes are low. In addition, there is more water pressure on the nozzles that spray the soles, which can be very useful for stubborn dirt.
The sole-shaft-cleaner for working shoes is recommended primarily for economic and ecological reasons. It consumes little water and no electricity. Furthermore, the efficiency of this boot washer can contribute to significant time savings when cleaning shoes and boots.
Image: Sole and shaft cleaner for cleaning work shoes.
The standard version is made of powder-coated, welded steel. If this device should come into contact with acids or other substances or is regularly exposed to high humidity, the stainless steel version is ideal. This can be selected under Options. With the separately available hand brush, even hard-to-reach areas and other equipment such as aprons or boxes can be cleaned quickly and thoroughly (see accessories below).
If you are looking for an identically constructed device which thoroughly cleans the boot shafts up to the very top, then the sole-shaft-cleaner for boots is recommended.
Technical data
Case: powder-coated steel / stainless steel (option)
Dimensions:
With handle retracted (storage/transport): 40 x 40 x 50 cm (width x depth x height)
With handle extended (active use): 40 x 40 x 87 cm (width x depth x height)
Water inflow:
Water outflow: free downwards
Operating temperature: 0° C - 50° C
Max. Water temperature: 60° C
Water pressure: max. 4 bar
Electrical supply: not necessary
Weight:
Warranty: 1 year
|