The boot washer with drip pan is a professional boot washing machine for cleaning coarsely soiled shoes. Thanks to the low side brushes, the boot washing machine is easily suitable for cleaning work shoes. The boot cleaner is made entirely of aluminium and is therefore very robust and lightweight. In addition, the grab rail can be folded together, which makes it extremely transportable due to its very compact dimensions.
This boot washer is ideal for use in construction companies, nurseries or on farms where a robust and long-lasting but transportable boot and work shoe washer is required.
Image: Boot washer with draining basin with drain for the dirty water.
The boot washer with draining basin offers the following advantages:
- Brushes with water spray bars clean soles and sole edges
- Suitable for boots and work shoes thanks to low-lying side brushes
- Water-bearing hand brush for cleaning the boot shafts and upper leather
- Water drain for clean discharge of dirt
- Quick and easy installation and removal of the boot washer
- Non-slip stand thanks to grate (easy to remove)
- Easy cleaning
- Low weight due to aluminium housing
- No power connection necessary!
The boot washer with drip tray has a high-quality floor brush for cleaning the sole and two side brushes for cleaning the sole edges. For optimum cleaning performance, the brushes are equipped with a rotating pipe with 10 cleaning nozzles. The water flow can be started via the galvanized ball tap on the holding bracket. The water then flows through the nozzles onto the footwear to be cleaned soften and remove dirt. The combination of running water and the rubbing of the boots in the nylon bristles of the bottom and side brushes removes even the most stubborn dirt in a few moments.
With the included water-bearing hand brush, boot shafts, upper leather and other equipment can be quickly and easily cleaned from dirt. In turn, the water is controlled by a galvanized ball valve attached to the holding bracket.
The dirty used water is then collected in the generous aluminium drip pan and discharged via a drain pipe on the back of the shoe washing system. The water connection is made via a standardised ¾ inch water GEKA quick-coupling. The grate can be easily removed for quick and easy cleaning and maintenance of the boot washer.
The aluminium support bar ensures a secure hold while using the boot washer. The frame folds up easily for transport. Due to its extremely compact dimensions and very low weight, this washing system can be transported quickly and easily from one place of use to the next.
Grate: galvanised steel
650 mm x 900 mm x 1000 mm (width x depth x height)
Folded together: Height approximately 27cm
Water inflow: Geka coupling ¾ inch brass
Water outflow: 50 mm diameter / Aluminium
Electrical supply: no power demand
Weight: 25 kg net
Warranty: 2 years
Hose casing made from stainless steel, synthetic brushes, galvanised tap valve.