Image: Space-saving sole cleaning, hand washing and hand disinfection with the Hygiene Centre for soles and hands.

When an employee approaches the hygiene centre, the red LED display indicates that the system is ready for operation. The anti-slip, removable stainless steel step makes it easy to enter the hygiene station. The employee stands on the stainless steel grid of the sole cleaning module during the entire cleaning and disinfection process. Sensors trigger the rotation of the roller brushes when the operator enters the system. The bristles of the high-quality nylon brushes protrude through the grating and rub all dirt off the soles. Water and the disinfectant is automatically directed onto the brushes in the desired concentration. The exact running time of the sole cleaning device can be adapted to the individual needs of each company.

While the soles are cleaned automatically, the employee washes and disinfects his hands using the following steps:

Step 1: The pre-set amount of detergent reaches the hands via the contact-free, sensor-controlled soap dispensers.

Step 2: Once the soap has been dispensed, the water in the sink starts to flow automatically for the pre-set time. The employee can then wash his hands thoroughly in the wash tray. All used water is collected in the stainless steel water tray and automatically drained off. The risk of water being carried over is reduced to an absolute minimum thanks to the generous design of the hand-washing sink. After the fresh water flow has been stopped, the LED display switches from red to yellow.

Step 3: With the paper towel dispenser attached to the hygiene centre, hands can be thoroughly dried after washing by hand. The used folding towel is dumped in the laterally positioned waste paper basket.

Step 4: After drying the hands, the employee places his hands in the two openings of the hand disinfector. Two sensors ensure the continuous presence of the hands and trigger the hand disinfection process. The hands are moistened with the disinfectant from all sides using full-cone jet nozzles. The exact application quantity is also pre-adjusted according to the needs of the company.

After successful hand disinfection, the signal display switches to green and the electrically connected door opener is released for entering the hygiene area. The LED display then switches back to red and the next employee can enter the hygiene centre.

The Hygiene Centre for soles and hands is ready for connection, but the price does not include siphon, backflow preventer, sealing and small parts or installation.