• Shoe washer with floor tub made entirely of stainless steel
  
• 1-digit to 2-digit - Available with one or two cleaning stations (see options)
  
• Including BA system separator in accordance with DIN 1717 for maintaining water quality
  
• For deeper or flush installation in floors and floor recesses
  
• Tray height 90 mm: extremely flat installation possible
• 12 interchangeable sole brushes per cleaning station
• Precise, lateral spray nozzles made of stainless steel
• Automatic water stop valve incorporated in the grab rail
• Stainless steel tray with central floor drain, sludge collection bucket and odour trap
• 3 stainless steel grids; the one in the centre is removable
• Practical crossbar for placing the foot for easy cleaning of work shoes
  
• With stainless steel hand support bar for greater stability
  
• With water-bearing hand brush and 1.5 m long metal flex hose
  
• Stainless steel stilts for easy installation
  
• Easy cleaning and maintenance
• No power requirement

The "Shoe washer work shoes built-in version flat" cleans work shoes effectively and quickly using 12 robust sole brushes per cleaning station. Soiled shoes are placed on the practical crossbar, which serves as a base. A signal is sent through the foot valve and stainless steel spray nozzles on the side thoroughly moisten the shoes from all sides. Soiling is effortlessly removed from the surface while the work shoes rub against the base and side brushes. This gives the shoes a new shine. The boot washer is equipped with an integrated splash protection wall as standard.

A stainless steel holding bracket at the correct height provides stability and safety during the cleaning process. On the left-hand side of each tub and bracket is a water-bearing hand-washing brush with a quick-closing valve and a stainless steel rinsing pipe to make shoe cleaning even more precise. The holding bracket has an integrated automatic water stop valve that can be easily operated with one hand. There are two versions and sizes of shoe washer to choose from: one with a single washing area and another with double capacity, which offers two boot cleaning areas. The double system that can be ordered also has a certified BA system separator in accordance with DIN 1717 to maintain the water quality.

The stainless steel tub of the shoe washing system has a central drain with a removable stainless steel grate in the centre. This grate is equipped with an integrated sludge trap and an odour trap to ensure smooth water drainage and prevent odour nuisance from the drainage system. The drain is available in either a vertical version with NW 100 or a horizontal version with NW 50. Both the centre grating in the double unit and the 12 sole brushes of the shoe washer can be easily removed and replaced, making maintenance and cleaning particularly easy. The water connection must comply with the local waterworks regulations and should be carried out by an authorised specialist company. No power connection is required. If you are interested in a boot washer, we recommend our "Boot washer steel flush to the floor flat", which has been specially developed for cleaning boots.