The sole cleaning machine WET 800 combines three basic functions in one extremely compact system. The rotating roller brush ensures perfect cleaning of heavily soiled soles of boots, clogs or work shoes. Due to the Easy-Clean function, the upper side of the footwear can be easily cleaned with the same brush. The footwear must simply be held in the intended opening, whereby the shoe is guided under the brush. For efficient cleaning of dirty boot shafts, the sole cleaning machine is provided with a water-bearing hand washing brush. With the individually adjustable water regulator attached to the washing brush, dirt can be removed quickly and easily from difficult accessible areas without getting wet to unwanted areas.
Learn more about the sole cleaning machine WET 800 in this product video:
The sole cleaning machine NASS 800 convinces by the following characteristics:
- Efficient mechanical cleaning of the soles
- Easy-clean function for easy cleaning of the upper side of the shoe
- With integrated hand brush for cleaning boot shafts
- Uncomplicated supply of disinfectants or cleaning agents
- Easy cleaning of the machine due to easily replaceable brushes and removable drain strainer
- Very high safety and longevity due to wall-mounted control cabinet
Image: Sole cleaning machine NASS 800 ideal for heavily soiled soles.
Disinfectants and cleaning agents can be easily added for hygienic cleanliness. The cleaning medium can be placed on a stable and easily accessible holder. The concentration of the cleaning and disinfectant can be adjusted with the aid of the connected supply pipe.
The control cabinet of the sole cleaning system is mounted on the wall behind the machine. The electronic components are therefore located outside the wet area.
The sole cleaning machine Nass 800 can be cleaned easily, quickly and without the use of tools. The roller brush can be easily removed and then cleaned in just a few steps. A second roller brush is recommended so that the system can be put back into operation as quickly as possible after cleaning. This allows the brush to be replaced and the sole cleaner to be used immediately. The stainless steel screen in front of the drain, which prevents clogging of the drain by collecting coarse particles, can also be easily removed.
Construction: Stainless steel 1.4301, dull
Dimensions: 760 x 635 x 1215 mm (width x depth x height)
Water inflow: 1/2"
Water outflow: 38 mm (Diameters)
Water pressure: 3 bar
Max. Water Temp.: 5 - 50°C
Water consumption: 6 l/min
Detergent injector: with regulation 0,2 - 9,3 %
Contact pushers: Button (green) at the top of the grab rail
Electrical supply: 3x400 V/N/PE; 50 Hz / 16 A
Control system: Switch cabinet for wall mounting
Capacity: 0.18 kW
Protection class: IP 65 (Motor IP 55)
Weight: ca. 50 kg
Warranty: 2 years