Description
The "Shoe washer built-in version for renovation" is a stationary cleaning system for work shoes. It is suitable for installation in existing ground depressions and is often used in fire stations, troop accommodation and commercial operations. The system has removable grids with 12 sole brushes and lateral water spray nozzles. A stainless steel support bracket ensures a secure stand. There is an automatic water stop valve and a system separator in accordance with DIN EN 1717 to protect the water quality. A water-bearing hand brush is also available.
The "Shoe washer built-in version for renovation" impresses with the following features:
- Ideal as a replacement model for older systems (e.g. Rotter boot washer)
- Without stainless steel tray (for installation at ground level in existing ground depression)
- Shoe washer in grating made entirely of stainless steel
- For installation flush with the floor in floors, floor recesses or grating panels
- Flat design; 60 mm installation depth
- Hot-dip galvanised installation frame with 12 interchangeable sole brushes
- Including lateral water spray nozzles
- Removable stainless steel grating for replacement (25 mm grating height)
- With integrated splash protection wall
- With system separator in accordance with DIN 1717 for maintaining water quality
- With stainless steel hand support bar for greater stability
- Automatic water stop valve integrated in the support bracket
- Practical crossbar for putting the foot down for easy cleaning
- Supplied with high-quality, water-bearing hand brush
- Including conversion kit for the water supply line
- Hand brush supplied with 1.5 m water hose for manual cleaning of shoes
- Easy cleaning and maintenance
- No power requirement
Image: "Shoe washer built-in version for renovation" for installation flush with the floor.
Contaminated shoes are first placed on the stainless steel grid and the 12 sole brushes. The stainless steel spray nozzles attached to the side of the machine thoroughly wet the footwear with liquid. The sole brushes, which work shoes rub against during the cleaning process, thoroughly remove soiling. During cleaning, the stainless steel grab rail provides a safe place to hold on to. On the left-hand side of the grab rail is a high-quality, water-bearing stainless steel hand washing brush equipped with a water hose. This enables work shoes to be cleaned individually and precisely. An automatic water stop valve is also integrated into the grab rail, which can be easily operated with one hand. The "Shoe washer built-in version for renovation" also has a certified system separator in accordance with DIN EN 1717, which protects the water quality.
The shoe washing system is embedded in a stainless steel grating, which allows for versatile installation. For example, directly in manhole covers or via a waterproof floor recess. The "Shoe washer built-in version for renovation" therefore offers a high degree of flexibility in the choice of location. It is particularly popular with the fire brigade, in military accommodation as well as in agriculture and commercial operations. It is also ideal as a replacement for older models such as the earlier "Rotter" model when renovating shoe cleaning areas. With the 1.5 metre long flexible hose supplied and the conversion kit for water pipes, conversion to the newer models is easy. In some cases, the shoe washing system can even be connected to existing floor tubs.
The boot washer is equipped with an integrated splash protection wall as standard. The grating and the 12 brushes of the shoe washer can be easily removed and replaced, making maintenance and cleaning simple. The water connection must comply with local water regulations and should be carried out by an authorised specialist company. A power connection is not required. If you are interested in a shoe washing system including a floor tub, we recommend the "Shoe washer work shoes built-in version flat".
Technical data
Casing: stainless steel 1.4301 with yellow powder coating
Dimensions:
522 mm x 822 mm x 60 mm (width x depth x height)
Height of retaining bracket: 980 mm
Installation depth: 60 mm
Height of the grating: 25 mm
Water inflow: KW R1/2" with shut-off valve
Water outflow: open at the bottom, without base tray, sludge trap and odour trap
Operating pressure: 2-6 bar
Electrical supply: not necessary
Weight:
Warranty: 2 years |
Blue Level Cleaning Systems
