Description
This free-standing stainless steel boot washer is the ideal solution for all areas where dirty footwear needs to be cleaned quickly and reliably without making structural adjustments to the floor. The system is particularly suitable for fire stations, maintenance depots, agricultural businesses, industrial and food companies. The system is installed, connected and immediately ready for use.
The "Boot washer stainless steel free-standing" impresses with the following features in professional use:
- Boot washer made of high-quality, rustproof stainless steel
- For above-ground installation on existing floor surfaces
- Optionally available with 1 or 2 cleaning stations
- Step height 215–240 mm adjustable via height-adjustable feet
- Sole and side brushes for thorough cleaning up to ankle height
- With 12 easily replaceable sole brush strips
- 2 cleaning brushes attached to each side
- Supplied with water-fed hand brush including 1.5 m long metal flexible hose
- With CA system separator in accordance with DIN EN 1717 to protect water quality
- Stainless steel tray with horizontal drain NW 50
- Splash protection wall, sludge sieve and odour trap made of stainless steel
- With stainless steel retaining bracket for greater stability
- Automatic water stop valve integrated into the retaining bracket
- Removable stainless steel grates for easy cleaning
- No power connection required
Image: Boot washer stainless steel free-standing with one cleaning station.
The Boot washer stainless steel free-standing is installed completely above the existing floor and is ideal for situations where built-in installation is not possible. Depending on requirements, the system is available with 1 or 2 cleaning stations (see options). Once connected to the water and drain pipes, the system is immediately ready for use.
Cleaning is carried out by robust sole brushes in combination with side-mounted cleaning brushes, which reliably remove dirt from the sole up to ankle height. Each cleaning station has 12 replaceable sole brush strips and 2 side brushes. For targeted additional cleaning, a water-fed hand brush is available on the left-hand side, including a 1.5 m reinforced hose with a quick-release valve and stainless steel rinse pipe.
The washer is equipped with a splash protection wall as standard. The step height can be adjusted from 215 to 240 mm using the stainless steel adjustable feet to suit the local conditions. During the cleaning process, the powder-coated stainless steel retaining bracket provides a secure handhold. The retaining bracket also incorporates the self-closing valve for automatic water control and the CA system separator in accordance with DIN EN 1717.
The dirty water is collected in the stainless steel tray and drained via the horizontal drain NW 50. The integrated sludge sieve and odour trap ensure hygienic and clean operation. The gratings can be easily removed for maintenance and cleaning work, making all relevant areas easily accessible. The water connection must comply with the regulations of the local waterworks and must be carried out by an authorised specialist company. A power connection is not required.
The boot washer is delivered on a pallet. Delivery is by lorry to the kerbside.
Technical data
Housing: stainless steel 1.4301 with yellow powder coating
Dimensions (1 cleaning station):
848 mm x 1106 mm (width x depth)
Height incl. retaining bracket: 1195 mm
Item number: STW-00021
Dimensions (2 cleaning stations):
1534 mm x 1106 mm (width x depth)
Height incl. retaining bracket: 1195 mm
Item number: STW-00022
Height of retaining bracket: 980 mm
Step height: 215–240 mm adjustable
Brushes (per washing station): 1 water-fed hand brush, 2 side brushes, 12 sole brushes
Water inlet (per washing station): KW R1/2" with shut-off
Water drain: horizontal NW 50
Operating pressure (per washing station): 2-6 bar
Electrical supply: not necessary
Weight: kg
Warranty: 2 years
|
Blue Level Cleaning Systems
