Description
The built-in boot washer in grating flat is a professional, stationary boot cleaning system. It is made of stainless steel and has 2 side brushes, 12 interchangeable sole brushes and side water spray nozzles. The unit thoroughly cleans boot soles and edges up to ankle height. A water-carrying hand brush cleans boot shafts and other accessories. The system includes a system separator according to DIN EN 1717 and an automatic water stop valve. Its use is especially popular in the fire brigade, in troop accommodation, at sports facilities and in commercial enterprises.
With the following features, the built-in boot washer in the grating is convincing:
- Professional boot washing system completely made of stainless steel with grating
- For easy installation in floor troughs; flush-floor, flat design (60 mm installation depth)
- As replacement unit for previous systems (e.g. Rotter)
- Includes 12 sole cleaning brushes for replacement
- 2 lateral brush strips for optimal cleaning of the footwear up to the ankle area
- With side-mounted stainless steel spray nozzles
- Cleans even ankle-high work shoes
- Removable stainless steel grid
- With integrated splash protection wall
- 1 wash place, open at the bottom; without floor pan
- With system separator to DIN 1717 to ensure water quality
- With stainless steel hand support for more stability
- With automatic water stop valve
- Including water-carrying hand brush
- Hand brush supplied with 1.5 m water hose for manual cleaning of boot shafts
- Easy cleaning and maintenance
- No electricity required
Image: Boot washer in grating for installation at ground level.
With the soft side brushes and harder sole brushes, the built-in boot washer in grid flat cleans boots thoroughly and quickly. The friction of the boots against the bottom and side brushes roughly loosens impurities from the surface of the boot material. During the cleaning process, the stainless steel grab rail provides a secure way to hold on. On the left side of the grab rail, a high-quality, water-carrying hand washing brush made of stainless steel and a quick-stop valve are within reach. The practical hand washing brush is especially suitable for individual, precise boot cleaning afterwards. A certified system separator FK4 according to DIN 1717 for maintaining water quality makes the design of the built-in boot washer in grating grate even more sophisticated.
Thanks to the standardised grating, the boot washer can be installed in a variety of ways. For example, it can be installed in shallow floor recesses or manhole covers without any problems. This boot washer can also be easily ordered as a successor and replacement model for earlier, old systems (e.g. Rotter). The included flexible hose and the conversion kit for the water pipes enable an uncomplicated conversion to this newer model. If you are interested in a boot washing system including a floor pan, we recommend the boot washing system stainless steel built-in version flat.
The boot washer is equipped with an integrated splash protection wall as standard. The stainless steel grating and the 12 brushes of the boot cleaning machine can be easily removed and replaced. This makes maintenance and cleaning especially easy. The water connection must comply with the regulations of the local waterworks and must be carried out by an authorised specialist company. No electricity connection is required.
Technical data
Housing: stainless steel 1.4301 with yellow powder coating
Dimensions:
522 mm x 822 mm x 60 mm (width x depth x height)
Height of retaining bracket: 980 mm
Installation depth: 60 mm
Height of grating: 25 mm
Water inlet: KW R1/2" with shut-off
Water outlet: open at the bottom, without sludge trap and odour trap
Operating pressure: 2-6 bar
Electricity connection: not necessary
Weight:
Warranty: 2 years
|
Blue Level Cleaning Systems
