The pass-through sole cleaning DRY 650 is particularly suitable for access to sensitive areas that need to be protected against water entrainment. Be it in a production company, at exits towards the social area, or for access to the office areas. The ideal solution is the use of a bottom drying station after a wet cleaning of the shoes via a manual shoe washing system or a hygiene station. This sole cleaning lock is mainly designed for soles of work shoes, boots and other heavy footwear. However, the system works perfectly for all shoes without heels. The drying lock is available in two different lengths (see options).

Image: Dry soles thanks to pass-through sole cleaning DRY 650.

The pass-through sole cleaning DRY 650 effectively reduces the carry-over of liquidity. This is ensured by the DryPad, an ultra-absorbent high-performance fleece stretched on a special VA grating. The micro-serrated textile fibres actively absorb moisture from the soles by capillary effects and dry them within seconds when walking on the fleece. The repeated contact of the shoe soles with the fleece guarantees effective drying.

The sole dryer is extremely mobile, as it can be easily transported to its destination with a lift truck and stowed away again after being used. Depending on the amount of moisture, it can be transported to the required location. As it is equipped with a drain tap, the pass-through sole cleaning station does not require a direct water connection, but can be emptied conveniently at a designated point after its use.

The drying station is equipped with a handrail on both sides for high stability and forced guidance. The entire construction is made of high-quality stainless steel and thus easily withstands the tough conditions in production companies and entrance areas.

In the following product video you can learn more about how the pass-through sole cleaning DRY 650 works. In the video, the mode of operation is explained by using the pass-through sole cleaning WET-DRY 700, which is additionally equipped with a brush element for the wet cleaning of the shoe soles.

Construction: Stainless steel 1.4301

Dimensions: (Version: Dry area length 976 mm)

980 mm x 800 mm x 1200 mm (Length x Width x Height)

Length of device: 980 mm

Dry area: 976 mm x 702 mm

Item number: HSE-00171V1

Dimensions: (Version: Dry area length 1952 mm)

1960 mm x 800 mm x 1200 mm (Length x Width x Height)

Length of device: 1960 mm

Dry area: 1952 mm x 702 mm

Item number: HSE-00171V2

Weight: 78 / 140 kg

Warranty: 2 years