ProfilGate i55 - made completely out of stainless steele
The ProfilGate® i55 replaces the hot dipped galvanized grates with pressed grates made from stainless steel which have a plain and finer surface. This results in smoother movement, especially for smaller /and or harder wheels. It comes, like all i-series models, with pressed grates made from stainless steel offering a plain / smooth surface.
The design and material of the Profilgate i55 is suitable for loads up to 20 to.
At just 55 mm high, the cleaning grates are either inserted at ground level or positioned on flat ramps to be driven over. This will create a cleaning area that all vehicles have to pass through. Dirt is removed by hot-dipped grating with special brush strips and then collected in stainless steel trays. The special brushes (patent-protected) are positioned at an angle, enabling them to automatically and mechanically clean the tread of wheels, rollers and tyres.
ProfilGate® i55 grates are only available in standard size 1x1.
More pictures of wheel cleaning System ProfilGate
With a height of just 55 mm, ProfilGate cleaning grates for pedestrians and vehicles (can withstand total loads of up to 40 t), can also be installed in hall entrances restrospectively. Patent-protected brushes clean the tyres while the vehicles drive over the cleaning grates without losing any time. Removed dirt is collected in trays located underneath the grating. The trays can be easily cleaned by removing the grating. All dirt falls into the trays, which prevents it from being picked back up again by the next vehicle.
To ensure effective tyre cleaning, we recommend that the tyre treads come into contact with the brushes at least three times. This will remove 90% of dirt!
ProfilGate basic models can be supplemented with ProfilGate dryzone, which prevents wetness from being brought into the building. Learn more about ProfilGate dryzone here.
Clean Factory Interactive
The Clean Factory shows the optimal applications of ProfilGate in clean factories. The Clean Factory concept demonstrates how most contaminants can be kept outside your facilities and cross-contamination between different work areas can be prevented through use of various ProfilGate models.
Use Clean Factory Interactive yourself to obtain more information – including pictures and references – about every ProfilGate model available. Just click on the blue and grey grates!
ProfilGate i55 – 100% stainless steel, suitable for removing large amounts of dirt
The i55 model features an additional, 10-mm high tray beneath the brush strips for collecting dirt, which means that the system can be cleaned less often.
We recommend ProfilGate i55 for use in areas that come into contact with a lot of dirt. Thanks to its stainless steel trays and grates, it is suitable for users who do not wish to compromise on design.
Casing: Stainless steel grating and tray (1.4301)
Module format: 1 x 1 unit
i55: 718 x 980 x 55 mm (width x length x depth)
Max. permissible vehicle weight:
Suitable for hard casters/wheels:
Suitable wheel width:
Grates per unit:
i55: 2 x 26 kg
Power connection: no power Connection necessary
Warranty: 2 years on the trays and grating. The brushes are also robust with
a guaranteed durability of 100,000 passages (under heavy traffic and with
regular cleaning) under normal use and by rotating the segments, they can
easily last up to 500,000 movements.
Typical layout of the ProfilGate Inox model
The width of the cleaning area corresponds to the size of the driveway. The area must be wide enough to ensure that vehicles of all sizes fit on the grates.
A ProfilGate model with deeper trays (b55 or b65) should be installed in outdoor entrances, as these usually encounter large amounts of dirt. As the trays can collect larger amounts of dirt, they do not have to be cleaned as often
The length of the cleaning area will determine how thoroughly the tyres are cleaned. For intensive and optimal dirt removal, we recommend that the grating is long enough for the tyres in question to roll over the area approx. 4 to 5 times.
Units: 2 x 3 ProfilGate i45
Grate sizes: 1404 x 2928 mm
Efficiency: extremely efficient at cleaning tyres with a diameter of up to 311 mm
Efficient at cleaning tyres with a diameter of up to 415 mm