The sole cleaning machine DRY 200
is a professional sole cleaning machine for the tough use in industrial environments.
Our sole cleaners are in daily use by several hundred renowned customers in industry, electronics, food industry, pharmaceutical industry, hospitals and trade. This model is functionally identical to the Sole cleaning machine DRY 100
except for the additional suction system.
Your employees can clean the soles, sole edges and upper leather of their work shoes carefully and efficiently with this system. The 4 roller brushes, the 2 side brushes and the oversized upper brush of the sole cleaning device ensure perfectly clean shoes for a large number of employees in the shortest possible time. Thanks to the integrated suction system, this device is suitable for the use in areas where dusts are difficult to clean and dangerous for the health.
These improvements can be obtained by using our professional sole cleaning machine:
- Cleaning of manufacturing facilities, offices and entry areas
- Elimination of carry-over dust, sand, cuttings, dirt etc
- Elimination of dust which is dangerous for health
- Lower cleaning costs
- Saves high-quality floor material
- Better care of work shoes
- Meeting the BRC Global Food Standard / IFS Food
Image: Industrial sole cleaning machine TROCKEN 200 with integrated suction and filtration system for fine dusts and microparticles.
The sole cleaning device is designed for tough, daily use in industrial areas. Four counter-rotating roller brushes thoroughly remove dirt and dust from the sole profile. Even very dirty soles are perfectly rubbed clean. Two brushes for cleaning the sole edges are attached to the side of the front area of the unit. The sole cleaning machine is also equipped with a very large upper brush for cleaning the upper leather.
The nylon brushes of the sole cleaner are driven by a powerful motor (650 rpm). The use of a robust toothed belt drive guarantees optimum pulling power and the ideal rotational speed of the various cleaning brushes. For the cleaning of their work shoes, the employees rub their feet alternately in the different round brushes of the sole cleaning device. The nylon bristles rub even the strongest impurities off the shoes in a few moments.
The brushed dirt is collected in a large dirt collection tray. With the tray system and the easy reachability of the dirt container, it can be emptied quickly and easily. The TROCKEN 200 sole cleaning machine also has a suction and filtering device in the casing construction. The removed dust and suspended particles are sucked into the upper casing by the vacuum and collected in the filter. The cleaned air is then released through an outlet grille in the back of the housing. The filter mat can be replaced in a few simple steps.
The sole cleaning machine can be equipped with conductive brushes
instead of nylon brushes for use in areas susceptible to electrical
discharge (see options). This ESD version prevents static charge during
the cleaning process, thus protecting sensitive electronic components.
Casing: Steel, coated
Color of the case: Graphite (RAL 7022), agate grey (RAL 7038)
Dimensions: 460 mm x 600 mm x 1100 mm (Length x Width x Height)
Brushes: 4 nylon wheel brushes, 2 nylon round brushes
Contact switch: Foot-sensor with timer
Exhausting volume: 360 m3/h (with filter mat 500 g/m2)
Electrical supply: 230 Volt (optionally 110 Volts)
Motor power: 180 Watt, 750 U/min
Weight: 62 kg netto, 66 kg brutto
Warranty: 2 years