Description
The Boot washer stainless-steel pro is a professional boot cleaner for the hard daily use on construction sites, in police and fire stations or in agriculture. The boot washing machine is made of high-quality, 2 mm thick stainless steel sheet and can be supplied in versions for 1 to 3 persons (see options).
The Boot washer stainless-steel pro offers up to 3 cleaning places. Comfortable boot cleaning, easy to clean device.
- Made from 2mm brushed stainless steel panels 1.4301
- Support for boots with detachable stainless steel grate
- Brushes for cleaning soles
- Cleaning brushes on the side
- Jet sprays with water nozzles
- ½" water connection for 1 cleaning place, ¾" water connection for 2 or 3 cleaning places
- Stop valve
- Tubing and hand held cleaning brushes
- Includes 1-3 hand held plastic washing brushes
to clean bootlegs
- 4 height-adjustable bases
- Outflow of NW 50
- Sludge collecting tub and odour trap available at an additional cost (see options)
- Choose between 1 to 3 wash stations per device (see options)
Image: Boot washer stainless-steel pro with detachable stainless steel grating and includes hand-held palstic washing brushes with water flowing through to provide basic cleaning for boot legs.
During boot cleaning, the higher, removable grid serves as a support surface for the boots. The boot shafts and the upper side can be thoroughly cleaned with the water-bearing hand brush included in the delivery. The spray nozzle bar in combination with the 3 permanently installed brushes, which ensure thorough sole cleaning and sole edge cleaning, is particularly effective in the Boot washer stainless-steel pro. The water hits the high-quality bristles and the boots to be cleaned through small spray nozzles. By rubbing the boot in the floor brush and the two side brushes, all dirt from the soles and sole edges is removed thoroughly and comfortably.
The used water is collected in the generous water channel and automatically discharged through a waste water pipe. To prevent blockages and unpleasant odours, the boot washer can be equipped with a sludge trap and an odour trap (see options). Our optionally available splash protection walls offer additional protection against moisture and dirt (see options).
Image: Manual for boot washer stainless-steel pro. The Boot washer stainless-steel pro is characterized above all by its robust and durable construction. Thanks to its design and removable grating, the system is extremely easy and quick to clean, reducing maintenance to an absolute minimum.
If you are interested in a washing system for work shoes, we recommend our Work Shoe washer, which corresponds in its functionality to the Boot washer stainless-steel pro but was specially developed for the cleaning of work shoes.
For an extra charge, the standard plastic hand wash brush can be replaced by an extremely professional stainless steel hand wash brush with nylon bristles, hand lever quick closing valve and a robust armoured hose made of wire mesh (see option hand wash brush).
Image: Optional stainless steel handheld washing brush
Image: Optional sludge collecting tub with or without odour trap
As an option the boot cleaner can be equipped with two side splashboards and one rear splashboard. This prevents the area around the wash station, as well as sensitive equipment and people in the area, from becoming wet and dirty as a result of spray (see option splash protection wall).
Image: Boot washer with splash protection walls.
The water connection must comply with the regulations of the responsible waterworks. The European standard DIN EN 1717 is the guideline here, supplemented by national standards. The drinking water installation must be carried out exclusively by an authorised specialist company. When connecting to the drinking water system, an approved system separator / pipe separator must be considered (not included in the delivery).
Technical data
Casing: Stainless steel
Grate: Stainless steel
Dimensions: (Version: for 1 cleaning station)
750 mm x 550 mm x 1150 mm (width x depth x height)
Item number: STW-00011
Dimensions: (Version: for 2 cleaning stations)
1500 mm x 550 mm x 1150 mm (width x depth x height)
Item number: STW-00012
Dimensions: (Version: for 3 cleaning stations)
2250 mm x 550 mm x 1150 mm (width x depth x height)
Item number: STW-00013
Water inflow: (1 / 2 / 3 cleaning places): ½" / ¾" / ¾"
Water outflow: NW50
Electrical supply: No power required
Weight (1 / 2 / 3 cleaning stations): 40 / 80 / 120 kg
Warranty: 2 years
|
Blue Level Cleaning Systems
