The work shoe washer offers up to 3 cleaning places for the splash-free and thorough cleaning of work shoes. The work shoe cleaner developed by Blue Level is unique in the field of professional cleaning of work shoes. Our ingenious system allows convenient, splash-free cleaning of heavily soiled work shoes and is designed for tough, daily use in police barracks, the construction industry, workshops, nurseries or industrial production plants.
The work shoe washer convinces with the following characteristics:
- Made of brushed 2 mm stainless steel panels 1.4301
- Work shoe support with removable stainless steel grating
- 1 special sole cleaning brush with higher side bristles for optimally cleaning sole edges
- Two spray guard panels
- Additional valve for regulating water quantity (spray guard)
- Special, deep-mounted jet sprays with water nozzles (spray guard)
- Jet nozzles can also be rotated, preventing water from being splashed
- Optimal cleaning of work shoes – leaving socks dry!
- 3/4” water connection
- Stop valve
- Includes 1-3 plastic handheld washing brushes for cleaning shoes
- 4 height-adjustable bases
- Outflow of NW 50
- Sludge collecting tub as an optional extra (see options)
- Sludge collecting tub and odour trap as an optional extra (see options)
- Choose between 1 to 3 wash stations per device (see options)
Image: Work Shoe washer with multiple spray guards allowing optimal cleaning of work shoe.In contrast to classic boot washers, the cleaning station for work shoes has low-mounted spray bars with water nozzles, a special splash guard on top (protective plate) and an additional valve for regulating the amount of water. In addition, the spray bars can be turned by hand and thus the direction of the water jet can be individually controlled. This guarantees intensive wet cleaning of the work shoes without water getting on the trousers or socks. In addition, this shoe washing machine is equipped with a specially developed floor brush with higher bristles at the sides, which ensures quick and perfect cleaning of the soles and sole edges of the work shoes.
For shoe cleaning, the work shoe is positioned on the higher, removable stainless steel grating. The hard bristles of the water-bearing hand brush can be used to thoroughly clean the upper surface of the shoes. The shoe can then be rubbed in the floor brush optimized for work shoes. Water is sprayed directly onto the brush and shoe via the swivel spray nozzles. The added water and rubbing in the bristles of the floor brush remove even the most stubborn dirt from the soles and sole edges of the work shoes in a few moments. The used water is collected in the water channel and automatically discharged into the drain.
The use of high-quality stainless steel makes the shoe washing system very robust and durable. In addition, the shoe cleaning machine is extremely easy to clean and maintain due to its unique design and removable grating.
Image: Manual for work shoe washer.
As an option the work shoe washer can be equipped with two side splashboards and one rear splashboard. This prevents the area around the wash station, as well as sensitive equipment and people in the area, from becoming wet and dirty as a result of spray (see option splash protection wall).
Image: Work shoe washer with splash protection walls.
For an additional cost, the standard handheld plastic washing brushes can be substituted for highly professional stainless steel handheld washing brushes with nylon bristles, hand level trip switch and a robust reinforced hose made from wire mesh (see options).
Image: Optional stainless steel handheld washing brush
Image: Optional sludge collecting tub with or without odour trap
The water connection must comply with the regulations of the responsible waterworks. The European standard DIN EN 1717 is the guideline here, supplemented by national standards. The drinking water installation must be carried out exclusively by an authorised specialist company. When connecting to the drinking water system, an approved system separator / pipe separator must be considered (not included in the delivery).
Casing: Stainless steel
Grate: Stainless steel
Dimensions: (Version: for 1 cleaning station)
750 mm x 550 mm x 1150 mm (width x depth x height)
Dimensions: (Version: for 2 cleaning stations)
1500 mm x 550 mm x 1150 mm (width x depth x height)
Dimensions: (Version: for 3 cleaning stations)
2250 mm x 550 mm x 1150 m (width x depth x height)
Water inflow: 3/4"
Water outflow: NW50
Electrical supply: No power required
Weight (1/2/3 cleaning stations): 40 / 80 / 120 kg
Warranty: 2 years